PORSCHE 944 EMISSION PIPECan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1994-98 (includes uncategorized and accessory items)
BBI9912020001 The bbi autosport Porsche 991 GT3 exhaust center section is a direct replacement for the secondary center muffler. For those who desire a slightly milder exhaust tune, this piece is a great alternative to our cup-style side muffler bypass pipes. By retaining stock side mufflers and valves, the factory "sports button" feature is kept to conveniently switch back and forth between the aggressive "sport" mode during spirited driving sessions and the quieter, more civil "non-sport" mode for minimal noise on the highway.
$2,100.00
Make a selection 21011199313 Improve sound and performance by decreasing exhaust backpressure with our catalytic bypass kit. - + 18 crank hp & + 13 crank torque. - weighs 28 lbs. (13 kg). - t 304 stainless steel. - made in europe. - reduces thermal load on the heads. We recommend purchasing one our prepackaged installation kits, part # FVDmk993301 please note: cat bypass pipes are not c.a.r.b. Certified (california) and are for racing use only. FVD is not responsible for emissions compliance. Engine management software must be updated to avoid a check engine light, purchase part # FVD99361891 or FVD99361890. General Fitment911 1994-98
$3,371.18
Make a selection BBI9912020003 The bbi autosport 997 & 991 GT3 / rs exhaust side bypass is a direct replacement for the factory primary side mufflers. The primary mufflers are weigh approximately 44 pounds total while the bbi pipes are 4 pounds in comparison. For durability and protection against corrosion, each system is meticulously tig welded using 304 aerospace grade stainless tubing with lower carbon content. The result is a substantial reduction in weight behind the rear axle which significantly improves handling and less restriction to produce a much more aggressive exhaust note.
$950.00
Make a selection BES96405000S1 This muffler produces a glorious flat six race car with low deep tones that reminds us of the 964 cup. It is manufactured in Germany by m&m exhaust, gmbh. This muffler is ideal for anyone who wants a lower deeper tone with more decibels, whether they are just replacing the side muffler or are running cat bypass, sport cats or a cup pipe. + 14 hp (10 kw) & + 15 tq (20 nm) gain. - 2 3/4 tubing (70mm). - weighs 13.8 lbs (6.3 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - does not interfere with emissions. - includes factory style hangars and new aero quip style clamps for simple installation. We recommend replacing your exhaust tip with this u...(choose a part on the right to read more)
$1,438.80
Make a selection 210111011D1 Improve sound and performance by decreasing exhaust backpressure with this catalytic bypass pipe. This is a painted steel bypass pipe, manufactured by dansk. They offer a complete line of tuning and performance parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. - + 10 crank hp. - lower, deeper, more exotic exhaust note. - steel coated with high temperature paint. - made in europe by dansk. - reduces back pressure and thermal load on the engine. - includes o2 sensor bung....(choose a part on the right to read more)
$306.90
Make a selection BBI9912020006 The bbi autosport Porsche 991 GT3 exhaust center section is a direct replacement for the secondary center muffler. For those who desire a slightly milder exhaust tune, this piece is a great alternative to our cup-style side muffler bypass pipes. By retaining stock side mufflers and valves, the factory "sports button" feature is kept to conveniently switch back and forth between the aggressive "sport" mode during spirited driving sessions and the quieter, more civil "non-sport" mode for minimal noise on the highway.
$2,100.00
Make a selection 99360611400 This temperature sensor is located on the intercooler intake pipe at the back of the intercooler. It monitors the air temperature / density, which affects the fuel mixture. Be sure to replace it when necessary as it can cause an increase in emissions or fuel consumption. Sold individually. 1 necessary per car. View/Change Diagram
From $24.44
Make a selection BES99115000S + 11 hp & + 10 tq gain. - 2 3/4 tubing (70mm). - 4 x 3.5 (90mm) round tips. - net weight is 16.4 kg / 36 lbs. (10 lb savings over stock 3.4 l mufflers) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. - 90 db maximum (oem muffler is 75 db for reference). - replaces OEM side mufflers and connects to OEM header and catalytic flange. Please note: this muffler does not include exhaust valves and is meant to replace the OEM system on the base 3.4l 991 (2012+). Power is stated at the crank. This is the very 1st aftermarket muffl...(choose a part on the right to read more)
$3,869.80
Make a selection FSPOR993TSPKGE Product details: General Fitment911 1994-98
From $7,750.00
Make a selection FSPOR992SC Purchase disclaimer: fabspeed motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 cfr section 86.1854.12(a)(3), clean air act 40 cfr 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.
$3,695.95
Make a selection FVD11125101 Improve sound and performance at the track by decreasing exhaust backpressure with our GT2 evo style exhaust pipe. These also shed a ton of weight as they bypass the catalytics and muffler. + 25 crank hp gain. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - made in Germany - weighs 2.2 lbs. (1.0 kg). Sold individually. 1 necessary per car. Please note: cat bypass pipes are not c.a.r.b. Certified (california) and are for racing use only. FVD is not responsible for emissions compliance. Engine management software must be updated to avoid a check engine light, purchase part # FVD99361891 or FVD99361890 General Fitment911 1994-98
From $468.60
Make a selection PS004 To achieve a louder and higher pitched exhaust sound with every kreissieg exhaust system, youll find that their cat-delete pipes are a recommended installation. This cat-delete pipe pipe was carefully developed along with each exhaust system to provide optimal performance. General Fitment911 1994-98
$2,129.25
Make a selection BES99115000SKR + 11 hp & + 10 tq gain. - 2 3/4 tubing (70mm). - 18 lb. (8.5 kg)weight savings over OEM center muffler. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. - replaces OEM center muffler and connects to OEM header and OEM side mufflers and OEM tips. Please note: this muffler is a direct replacement the 991 Carrera s (3.8l - us model) which comes standard with valves. It is also a direct replacement for the Porsche sport exhaust option. This center muffler bypass for the 991 is one of the most technically advanced for Porsche t...(choose a part on the right to read more)
$3,713.60
Make a selection FVD11125201 Improve sound and performance at the track by decreasing exhaust backpressure with our GT2 evo style exhaust pipe. These also shed a ton of weight as they bypass the catalytics and muffler. + 25 crank hp gain. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - made in Germany - weighs 2.2 lbs. (1.0 kg). Sold individually. 1 necessary per car. Please note: cat bypass pipes are not c.a.r.b. Certified (california) and are for racing use only. FVD is not responsible for emissions compliance. Engine management software must be updated to avoid a check engine light, purchase part # FVD99361891 or FVD99361890 General Fitment911 1994-98
From $468.60
Make a selection FSPOR992TVLV Treat your 992 turbo to the finest cat-back exhaust solution on the market. This valveed exhaust system is plug-and-play with the factory pse system so you can turn pse off for quiet highway cruising and turn pse on for ripping twin turbo sports car sound!
$5,245.95
Make a selection
© 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |